Pear Body Medium Bust Option Part (Tea) Fit Guide

Quick Answer

To fit the Pear Body Medium Bust Option Part (Tea), align the bust's mounting pegs with the chest slots on a Pear body and press firmly until it clicks into place. Ensure the body is warm and the pegs are oriented correctly to avoid damage.

Step-by-Step Fitting Process

1. Prepare the body and bust: Warm the chest area of the Pear body and the bust part slightly with a hairdryer on low heat or by placing them in a warm room for a few minutes. This softens the material and makes the pegs more flexible. Do not overheat; keep the heat moving to avoid warping.
2. Align the mounting pegs: Hold the bust so the mounting pegs face the chest slots on the body. The pegs are usually shaped asymmetrically—match the wider peg to the wider slot (often the left side). Check the orientation before pressing to avoid forcing the peg.
3. Press and click into place: Press the bust firmly toward the body until you hear or feel a click. Apply even pressure with both hands, starting from the center and moving outward. If it doesn't click, remove and re-align rather than pushing harder.
4. Check the fit and adjust: Gently wiggle the bust to ensure it doesn't move. Look at the gap between the bust and the chest—it should be flush with no visible separation. If there's a gap, remove and re-seat the bust, checking for debris or misalignment.
5. Test pose and maintain: Pose the doll to see if the bust stays in place during movement. For long-term storage, remove the bust and store it separately to prevent stress on the pegs. Avoid frequent removal; it can loosen the fit over time.

Product Facts

• Pear Body Medium Bust Option Part (Tea): The Pear Body Medium Bust Option Part (Tea) is a bust option part from the N3 brand, designed for the Pear body style in the Tea color. This confirms it is a compatible accessory for Pear body owners who want a medium-sized bust in a Tea tone.